Description
| ITEM | DESCRIPTION | NRD-1600 | |||
| CAPACITY | Drilling capacity (mm) | Steel | 50 | Cast Iron | 60 |
| Tapping capacity (mm) | Steel | M30 | Cast Iron | M45 | |
| Boring Capacity (mm) | Steel | 100 | Cast Iron | 180 | |
| Distance from column face to spindle center (mm) | Min | 375 | |||
| Max | 1600 | ||||
| Distance from column center to arm end (mm) | 2079 | ||||
| Distance from base plate to spindle end | Min | 320 | |||
| Max | 1460 | ||||
| SPINDLE | Taper | MT5 | |||
| Diameter of spindle/quill | Spindle | 85 | Quill | 110 | |
| Spindle stroke (mm) | 300 | ||||
| Number of spindle speeds (step) | 12 | ||||
| Spindle Speed | 50 Hz | 32,50, 72,105,145,205,265,380,565,830, 1130, 1645 | |||
| 60 Hz | 38, 60, 85, 130, 175,245,320,460, 680, 1000, 1350, 1975 | ||||
| Number of spindle feeds (step) | 6 | ||||
| Feeds er revolution (mm/rev) | 0.07 / 0.13 / 0.23 / 0.33 / 0.58 / 1.01 | ||||
| SPINDLE HEAD | Horizontal travel (mm) | 1225 | |||
| Max. height floor to top of head (mm) | 2954 | ||||
| COLUMN ARM | Column sleeve diameter (mm) | Ø 380 | |||
| Vertical travel of arm (mm) | 840 | ||||
| WORK TABLE | Size of working surface | 650X500 | |||
| BASE PLATE | Size of working surface | 1750X 1030 | |||
| MOTOR | Main motor (kW) | 3.7 | |||
| Arm vertical moving motor (kW) | 1.5 | ||||
| Clamping motor (kW) | OA | ||||
| Coolant pump motor Wvl | 100 | ||||
| Power ejecting pack (Wl | 400 | ||||
| MACHINE DIMENSION | Height of floor to column cap (mm) | 2560 | |||
| Base size (mm) | 2480X1050X240 | ||||
| Machine mass (kg) | 4500 | ||||
