Description
| ITEM | DESCRIPTION | NRD-1600 | |||
| CAPACITY | Drilling capacity (mm) | Steel | 75 | Cast Iron | 90 |
| Tapping capacity (mm) | Steel | M60 | Cast Iron | M80 | |
| Boring Capacity (mm) | Steel | 220 | Cast Iron | 280 | |
| Distance from column face to spindle center (mm) | Min | 445 | |||
| Max | 2620 | ||||
| Distance from column center to arm end (mm) | 3230 | ||||
| Distance from base plate to spindle end | Min | 510 | |||
| Max | 1770 | ||||
| SPINDLE | Taper | MT5 | |||
| Diameter of spindle/quill | Spindle | 85 | Quill | 110 | |
| Spindle stroke (mm) | 400 | ||||
| Number of spindle speeds (step) | 16 | ||||
| Spindle Speed | 50 Hz | 18, 25, 33,46, 62, 83, 116, 158, 200, | |||
| 270, 370, 500, 690, 940, 1283, 1730 | |||||
| 60 Hz | 22,30,40,55,75,100,140,190,240,325, | ||||
| 445,600,330,1130,1540,2080 | |||||
| Number of spindle feeds (step) | 12 | ||||
| Feeds per revolution (mm/rev) | 0.004,0.006,0.08,0.11,0.15,0,21,0.29, | ||||
| 0.39,0.52,0.71,0.97,1.33 | |||||
| SPINDLE HEAD | Horizontal travel (mm) | 2175 | |||
| Max. height floor to top of head (mm) | 3647 | ||||
| COLUMN ARM | Column sleeve diameter (mm) | Ø 500 | |||
| Vertical travel of arm (mm) | 860 | ||||
| WORK TABLE | Size of working surface | 800X650 | |||
| BASE PLATE | Size of working surface | 2680X1240 | |||
| MOTOR | Main motor (kW) | 7.5 | |||
| Arm vertical moving motor (kW) | 3.7 | ||||
| Clamping motor (kW) | 1.5 | ||||
| Coolant pump motor Wvl | 100 | ||||
| Power ejecting pack (Wl | 400 | ||||
| MACHINE DIMENSION | Height of floor to column cap (mm) | 3110 | |||
| Base size (mm) | 3100X1250X295 | ||||
| Machine mass (kg) | 9500 | ||||
